Choose the best equipment for cutting falco

Roof reconstruction begins with the removal of the original roof and roofing material. Often the original roofing is metal roofing, which is the most difficult to dismantle. Honest sheet metal from the socialist era is a tough nut to crack. Another reason for dismantling the roofing may be certain defective roof constructions that require reconstruction after only 10 years after the roof has been constructed. Here, the fault is mainly the poor anchoring of the profiled strips or damage to the insurance waterproofing in the composition of the roof structure. Be that as it may, I have many questions about which machine is suitable for cutting the purlins. Which machine can cut sheet metal quickly and without the need for an angle grinder. Its easy disassembly. I would use such peasant advice when choosing a machine. The heavier the better. So if a falsecutter is at least 20 kg it can guarantee some reliable cutting performance.

Overview of halyard closers

In the table below, we will clearly present the basic parameters of the hinge closers used on the market.

Electric halyard closer K9-1 No damage to painted or coated sheet metal. Adjustable for height 25-60 mm. Working speed 5.5-13 m/min. Maintenance-free. With a safety switch that stops the machine automatically at the end of the panel or against an obstacle. Power: 230 V/1150 W, Weight: 21 kg.	Halyard sealer K9-1 from DRACO
Schlebach Flitzer falsecloser	FLITZER falsecloser Cutting is possible with the purchase of cutting wheels. for halyard height 25 mm and 38 mm for sheet thickness 0,5 – 0,8 mm by replacing the two folding rollers, it changes from a double halyard to an inclined halyard 220 volt motor, working speed 9 m/min weight about 23 kg in wooden box
Seaming Pro – folding and cutting Faster, more flexible (quick conversion to different functions) and more convenient than similar devices from other manufacturers Creates double bumps standing in one step Speed 8 to 12 m/min. One device for three uses: double rack, corner grate and cutting off the old grate Wireless operation – simply mount a standard battery screw (100-135 Nm) on one of the two brackets (roof or elevation drive) Ability to disconnect and reinstall at any time Can be used on 25 mm and 32 mm profiles Permanent flexible interior with snail drive – no plastic parts used Corrosion resistant rolls Plate spring optimises the force of the plate The device weighs 6.5 kg (without screw) Machining copper, zinc and aluminium up to 0.7 mm thick, galvanised or painted steel up to 0.6 mm thick and stainless steel up to 0.5 mm thick Possible delivery including cutting wheels	Cutting of the Seaming Pro halyard by Freund
	FALZ CUTTER FALZ CUTTER Felt cutter suitable for dismantling of the roofing material. is suitable for dismantling corrugated roofing. Technical information: Weight: 2.8kg Cutting speed 30 m / min 100 m² / 7 min Suitable for cutting material Stainless steel: 0.5 mm Steel type: 0.7 mm Copper, zinc and aluminium: 0.8 mm Use We recommend using a cordless drill with a torque of 110 N m or more. Minimum torque 60 N m for soft-top segment CORDLESS DRILL NOT INCLUDED! Protected by military case with safety foam The Falz Cutter is designed to dismantle a standing seam metal roof, disassembles double standing seam fasteners. The Falz Cutter can be positioned in any double-locked location with a standing seam, allowing you to not only remove roof joints, but also cut out area for different types of needs, such as ventilation shafts and skylights.