Discover the MARCUS manual bending system
Take advantage of our manual bending system, which consists of several aids from different manufacturers. The philosophy behind these roll benders and hand bending systems is to make roof work easier. It happens that it is on the roof that you need to bend a short lee rail, or to produce a sheet for the sheeting of a chimney. All this can be done with the bending machines shown below. You just have to choose the right one.
Use of a roll bender.
Overview of roll benders
A suitable set of roll benders is also using a plate bender and a profiling wheel. The profiling wheel is new this year and is very popular with plumbers.
Instructions for making profiled sheet metal
Next, we will show you how to use a roll bender to produce a profiled sheet. Slang for “sharna sharna scharre”. First of all, you need to read off the following dimensions on the sheet:
- small halyard – measurements 9 and 34 mm (make bends 9 and 25 mm),
- large falc – dimensions from the edge of the sheet 9, 23 and 45 mm (make bends 9, 14 and 25 mm).
Overview of MARCUS markers
With this method of bending, it is necessary to have good quality markers so that you have the exact method of bending pre-marked. For this method I recommend a round marker or one that fits your hand better.
- MARCUS badge
- Round marker
- Extended marker
- Triangle marcus
- Sheet metal folding aid
If you have any questions, please do not hesitate to contact us, we will be happy to talk to you and advise you.
