Plumbing tools

Installation of gutter system

Roof folding tools

Fallow shutters

Bending tongs

Markers and angles

Flat, round and creping pliers

Plastic and wooden hammers

Drazkovnice

Sheet metal shears

Benders

Rolling benders

Extrusion guns

Pomôcky na ohýbanie

Knihy

Plastic and wooden hammers

Nylon Hammer PICARD ES 252 / 20a Ø 32 mm

104160

€19.99

Special nylon hammer, excellent for roofing roofers, interchangeable nylon heads, Ø 32 mm, weight: 360 g.

Black stripe on the sheet of paper JOUANEL

Markers and angles

Black stripe on the sheet of paper JOUANEL

106800

€4.09

Black stripe on the sheet of paper JOUANEL Black Description of width approx. 3 mm No cap

JOUANEL - Clamp To Close The 1st Fold, Width 220 mm

On sale!

Roof folding tools

JOUANEL Double Lock Seamer

105456

€111.73

JOUANEL - Clamp To Close The 1st Fold, Width 220 mm By leaving the tool engaged and by simple sliding less than a tool length, the traces of tightening are eliminated. The ergonomic positioning of the handles makes the use of this clamp particularly practical and does not cause any fatigue

Hammer without retro-reflection SUPERCRAFT, 30 mm

Roof folding tools

Hammer without retro-reflection SUPERCRAFT, 30 mm

103685

€36.90

Special hammer without retro-reflection (with balls), excellent device, especially for roofing roofers, interchangeable nylon heads, Ø 30 mm, length: 330 mm, weight: 400 g.

Markers and angles

Marking pen for chimney production

107336

€19.97

Marking pen for chimney production

Plastic and wooden hammers

Retro-reflective hammer Ø 30 mm

107111

€30.65

Information A Picard hammer with a retro-reflection. Weight of hammer with handle: 500 years. Diameter: Ø 30 mm.

Plastic and wooden hammers

Hammer without retro-reflection, square

107059

€57.40

Information It protects the wrist and elbow very well for a double composition, because it weighs only 700 g. A hammer is better in the corner in a tight seam. The jaws are interchangeable (simply pick them up from the boar). A special rubber handle for good adhesion even when sweating.

Rolling benders

Rolling of sheet - production of sheets

105123

€203.98

Bending device and you can bend the sheet from a bending of 135 ° to a bending of 180 ° or you can bend it without bending back to save your bending

Nylon hammer, 32 mm - Picard 252 / 20 ES

Plastic and wooden hammers

Nylon hammer, 32 mm - Picard 252 / 20 ES

107069

€19.44

A plastic Picard hammer with interchangeable warheads. Weight of hammer with handle: 450. Handle: Ash wood. Length: 290 mm. Diameter: 32 mm.

Line plotter cord - Signalling Wall, 30 m

Markers and angles

Chalk line reel with large handle 30 m

103731

€16.61

A metal body-mounted (plasticised), metal-coloured, branded "STEADER", a simple and rapid filling of the colour, a simple unwinding and winding of the cord, a blocking of the line by the closing of the handle, the construction and the weight make it possible to use the marking cord also as a pencil, a length of 30 m.

Roof folding tools

Non-Rebounding Hammer with Nylon Face Ø 25 mm

107135

€37.93

Special hammer without retro-reflection (with balls), excellent device especially for roofing roofers, interchangeable nylon heads, Ø 25 mm, length: 330 mm, weight: 400 years.

Square-headed and arched-headed Klampiara hammer

Square-headed and arched-headed Klampiara hammer 2

Kladivá PICARD

Double headed Plumbers Hammer

107086

€50.22

A squid hammer with a square and arched head. Made of alloy special steel Picard - carefully hardened and released. A head and a handle with a wedge clamp. Gently polished.

Plastové a drevené kladivká

Hammer 400 g cross

107012

€50.22

Hammer 400 g cross

Professional Solid Hand Riveter GESIPA NTS

Riveting tongs

Professional Solid Hand Riveter GESIPA NTS

10494

€50.23

A professional hand riveter from the German manufacturer GESIPA. Made of high-quality die-cast aluminum, forged steel jaws. The narrow head of the pliers allows you to work in hard-to-reach places. Handy flanged handles , opening spring for self-ejection of pins and optimized one-handed operation, safety clip .

On sale!

Markers and angles

Pica-Marker Brand-brand pencil PICA DRY

106756

€17.10

A universal pencil for carpenters, carpenters and bricklayers. It has a very practical casing with a built-in clothesline. A very good choice is to exchange the contents of the different colours. Excellent for marking in hard-to-reach places. Diameter: 2.8 mm. Hardness: 2 (b)

Leather belts and pockets

TOOL BAG JOUANEL

105124

€80.98

A large-scale tool bag stores tools up to 15 kg. A flexible valve that completely covers the dry zipper and is coated with dry zippers over the entire length will protect your equipment from rain and dust on the construction site. The sliding window is intended to gain access to the transport sheet without opening the flap. This textile bag, highly...

PICARD carpenter's hammers

Pebble hammers for moulding on drainage

10061

€38.90

Picard 163b Falling Hammer, weight: 300 years. Suitable for dredging.

Bending tongs

Bending pliers 60 mm, straight, 280 mm

10906

€48.18

Bending pliers 60 mm, straight, 280 mm

Installation of gutter system

Gutter leveler - 65 cm

11290

€92.15

___R E C O M M E N D E D___ Used for leveling hooks after winter. Length 65 cm.

Locksmith hammers

Bench hammer - PICARD 301

104583

€26.45

Iron or steel hollow-point hammer

On sale!

Plastic and wooden hammers

Nylon hammer Simplex Ø 30 mm

107487

€35.06

A plastic Picard hammer with interchangeable warheads. Weight of hammer with handle: 370 grams. Handle: Ash wood. Length: 280 mm. Footwear has a width of 95 mm Diameter: 30 mm.

Pomôcky na ohýbanie

T-bar for rounding 36 cm Ø 13 mm

106541

€101.48

Manual winding of the actuators Ø 13 mm, specially designed for zinc works, is a solution for the manual lining of small zinc parts. By means of a 13 mm diameter rod system with which our rods are equipped, this rod will allow you to manually line the sides of the sill or any small piece of metal. T-bar for rounding 36 cm Ø 13 mm

Plastic and wooden hammers

Cross Hammer

104938

€58.90

Cross-hammer. Made of alloy special steel Picard - carefully hardened and released. A head and a handle with a wedge clamp. Polished fine

Bending tongs

Bending pliers 60mm, 45 degrees, 280 mm

10907

€45.82

Bending pliers 60mm 45 degrees

%product-name% %ean13%%ean13% ALPHA - carpenter's corner 3 workshops

%product-name% %ean13%%ean13% ALPHA - carpenter's corner 3 workshops 2

On sale!

Markers and angles

Scribing Tool Alpha Set

103367

€130.38

Basic information The set shall contain: The Alpha Classic label, the carpenter's corner, the beech-wood corner. The rectangle has a two-sided engraving, i.e. the scale is on both sides of the rectangle!

GESIPA Flipper - Accessory thread pliers

Riveting tongs

GESIPA Flipper - Accessory thread pliers

105283

€80.97

It is easy to transport and is equipped with a small number of threads of several types so that you can start work immediately. Rivets Flipper is an exclusive development of Gesipa (Gesipa). Thanks to the special grinding mechanism, the process of installing a thread is 40% simpler than a regular hand thread, and you can work with one hand.

Tongs

Toggle joint hand riveter pivoting head 360°

9923

€61.99

Toggle joint hand riveter, pivoting head 360°

Fallow shutters

UniBieger T XL ohýbanie 35 mm

107599

€757.00

Roof folding tools

Light seamer for standing seam profiles

107571

€2,552.25

Information Light seamer reference SRLT2 for standing seam profiles, first and second fold in one pass on roofs and first fold on facades. 25, 32 and 38mm height, with base for screwdriver and stackable transport case. Light seamer for standing seam profiles height 25 or 32mm - 1st and 2nd fold

Plumbing tools

Screws

107555

€35.00

Piping screws

On sale!

Markers and angles

Pica-Marker Brand-brand pencil PICA DRY BIG

107488

€24.50

BIG Dry carpentry pencil the size of the pencil refill is 5 x 2 mm

On sale!

Plastic and wooden hammers

Nylon hammer Base Ø 30 mm

107474

€28.70

A plastic Picard hammer with interchangeable warheads. Weight of hammer with handle: 370 grams. Handle: Ash wood. Length: 280 mm. Footwear has a width of 95 mm Diameter: 30 mm.

Bending tongs

Bending pliers 200 mm beveled, length 570 mm

107311

€223.96

Bending pliers width 200 mm length 570 mm length of jaw 170 mm

Rolling benders

Hand bearing bending JOUANEL PLIMDC3-350

107280

€809.75

Two-column manual brackets, 3 guiding cylinders, which allow the formation of curves and bends of long lengths ranging from 5 mm to 350 mm depending on the model and up to an angle of maximum 100 °. Its broad sheathed handle ensures very good grip of the instrument and its 2 folding cylinders improve the upkeep of the sheet and the quality of bending in...

Roof

Sliding clips 25 mm

105010

€149.00

(€0.30/ks)

Short information Design with rounded corners and corrugations to prevent damage to the roof covering by means of high corners, but also to stiffen the lower part or to compensate for the used nail heads. Due to the special shape of the upper part, a slight clamping effect is achieved in the pre-profiled fold, so that the attachments suspended for...

Roof

Fixing clips 32 mm for seamed roof

105739

€61.50

(€0.12/ks)

Showing 1-36 of 48 item(s)

Product added to compare.

Plumbing tools

Information

Business information

Store Information

Follow us

Payment options