Many façade contractors do not use a termination profile in the cladding. There are several reasons for this. Therefore, you have also experienced problematic connection of the flashings to the silicate plaster. Usually the joint between the flashings and the plaster is filled with sealant, but over time this joint cracks and allows water to leak in during heavy rainfall. Use
Termination profile for cladding no. . Zabezpečí vodotesný spoj, ktorý je schopný odolávať pohybom oplechovania. Pre realizačnú firmu je hlavnou výhodou to, že sa použitím tohto profilu vylučujú prípadné reklamácie v týchto miestach na streche.
Incorrect implementation of the connection of the flashing to the silicate plaster
The next chapter is the flashings at the chimney. There it is solved differently. The fact is that the truss works and at the chimney it is necessary to treat possible leakage in the area of the sheathing. There, most plumbers only address this by using flashings and a transparent sealant. This solution is only suitable for the lifetime of the silicone. And that is very little. By using a termination profile in the flashings, you guarantee watertightness in this joint for at least the lifetime of the building work. So don’t be inspired.
